This robust Titanium Grade 5 stock sheet offers exceptional strength-to-weight ratio and superior corrosion resistance. Precisely manufactured to stringent standards for critical safety applications.
| Standard | ASTM A106 |
| Material | Titanium Grade 5 |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.393" |
| Length | 47" |
| Width | 47" |
Manufactured under strict quality controls, this Titanium Grade 5 (Ti-6Al-4V) stock sheet measures 0.393 inches (10mm) thick, 47 inches (1194mm) in length, and 47 inches (1194mm) in width. Exhibiting a minimum tensile strength of 128,000 psi and yield strength of 120,000 psi, it boasts excellent fatigue strength and biocompatibility. Its high performance makes it suitable for demanding environments where reliability and longevity are paramount, including structural components and critical equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material compatibility with the intended application. 2. Ensure proper cutting and shaping tools are used to avoid material stress or damage. 3. Follow established welding or fastening procedures specific to Titanium Grade 5.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel cutting tools without appropriate adjustments. | Utilize specialized carbide or high-speed steel tooling designed for titanium alloys to prevent excessive heat buildup and tool wear. |
| Neglecting proper surface preparation before welding. | Thoroughly clean the titanium surface to remove any oxides, oils, or contaminants to ensure weld integrity and prevent porosity. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Aerospace structural components, Medical implants and prosthetics, High-performance industrial equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||