This Titanium Grade 5 stock sheet offers exceptional strength-to-weight ratio and superior corrosion resistance. Precisely manufactured to meet stringent industrial demands, it is ideal for critical component fabrication.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.357" |
| Length | 17" |
| Width | 39" |
Manufactured under strict quality controls, this Titanium Grade 5 stock sheet measures 0.357 inches in thickness, 17 inches in width, and 39 inches in length. Composed of approximately 90% titanium, 6% aluminum, and 4% vanadium (Ti-6Al-4V), this alloy exhibits a tensile strength exceeding 130 ksi and a yield strength of approximately 120 ksi, with excellent fatigue strength and biocompatibility. Its high strength and low density make it a preferred material for aerospace structural components, medical implants, and high-performance industrial equipment where extreme conditions and reliability are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure surface cleanliness and deburring of any edges before integration. 2. Utilize appropriate fastening methods compatible with titanium alloys, such as welding with inert gas shielding or specialized mechanical fasteners. 3. Conduct post-installation inspection to verify structural integrity and adherence to design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard tooling designed for steel without proper adjustments. | Employ carbide or high-speed steel tooling with increased rake angles and coolant application for titanium machining. |
| Inadequate inert gas shielding during welding. | Utilize a sufficient flow of Argon or Helium shielding gas to prevent atmospheric contamination and embrittlement. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Aerospace structural components, Medical implants and surgical instruments, High-performance marine hardware.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||