This high-performance Titanium Grade 5 stock sheet offers exceptional strength-to-weight ratio and superior corrosion resistance. Precisely manufactured for critical applications where reliability and durability are paramount.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.346" |
| Length | 40" |
| Width | 47" |
Built to exacting engineering tolerances, this Titanium Grade 5 (Ti-6Al-4V) stock sheet measures 0.346 inches thick, 40 inches in length, and 47 inches in width. Grade 5 titanium is an alpha-beta alloy renowned for its excellent mechanical properties, including high tensile strength, fatigue resistance, and fracture toughness, at elevated temperatures. Its passivation layer provides outstanding resistance to a wide range of corrosive environments, making it suitable for aerospace structural components, medical implants, marine hardware, and chemical processing equipment where lightweight, robust, and inert materials are essential.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure proper safety protocols and personal protective equipment are utilized. 2. Verify the material meets all project specifications before cutting or machining. 3. Fabricate and install according to established engineering drawings and industry best practices.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Assuming standard steel fabrication techniques are directly applicable. | Utilize specialized tooling and machining parameters optimized for titanium alloys to prevent tool wear and ensure accurate cuts. |
| Inadequate surface preparation for welding or bonding. | Thoroughly clean the titanium surface with appropriate solvents to remove any contaminants that could compromise joint integrity. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Aerospace structural components, Medical implants and devices, High-performance marine hardware.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||