This Titanium Grade 5 stock sheet offers superior strength-to-weight ratio and exceptional corrosion resistance. Precisely manufactured to meet stringent industry standards, it's ideal for critical components requiring high performance and durability.
| Standard | ASTM A106 |
| Material | Titanium Grade 5 |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.340" |
| Length | 16" |
| Width | 25" |
Built to exacting engineering tolerances, this Ti-6Al-4V (Grade 5) titanium sheet measures 0.340 inches thick, 16 inches in length, and 25 inches in width. Exhibiting a high yield strength of approximately 128 ksi and a tensile strength of roughly 138 ksi, it also boasts excellent biocompatibility and fatigue resistance. This material is commonly employed in aerospace structural components, medical implants, marine hardware, and high-performance sporting goods where reliability under extreme conditions is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material dimensions and surface finish against project specifications. 2. Ensure proper tooling and cutting parameters for Ti-6Al-4V are utilized to prevent material degradation. 3. Clean surfaces thoroughly with an appropriate degreaser before subsequent fabrication or assembly steps.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard tooling without accounting for titanium's hardness. | Employ specialized tooling designed for titanium alloys and adjust cutting speeds and feed rates accordingly to avoid tool wear and work hardening. |
| Inadequate surface preparation leading to poor adhesion or weld integrity. | Thoroughly degrease and mechanically clean the surface prior to any bonding, welding, or coating processes. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Aerospace structural components, Medical implants and surgical instruments, Marine hardware and subsea equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||