This Titanium Grade 5 stock sheet is engineered for demanding pneumatic systems. Its superior strength-to-weight ratio and exceptional corrosion resistance ensure reliability in harsh environments.
| Standard | DIN 933 |
| Material | Titanium Grade 5 |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.314" |
| Length | 21" |
| Width | 23" |
A high-performance industrial component, this Titanium Grade 5 stock sheet (Ti-6Al-4V) offers an exceptional combination of strength, lightweight characteristics, and corrosion resistance. With a thickness of 0.314 inches, a length of 21 inches, and a width of 23 inches, it is ideally suited for fabricating critical pneumatic components such as valve bodies, cylinder housings, and specialized fittings. The material's excellent biocompatibility and fatigue strength also make it suitable for advanced applications where material integrity is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet surface is clean and free of contaminants. 2. Precisely cut the sheet to the required component dimensions using appropriate tooling. 3. Machining and finishing should be performed according to industry best practices for Titanium Grade 5.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for titanium alloys. | Employ carbide or diamond-coated cutting tools with appropriate speeds and feeds for titanium to prevent premature wear and ensure clean cuts. |
| Inadequate surface preparation before welding or joining. | Thoroughly clean and de-oxidize all surfaces to be joined using non-abrasive methods to ensure optimal weld integrity. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: High-pressure pneumatic valve bodies, Corrosion-resistant pneumatic cylinder components, Specialized pneumatic fitting fabrication.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||