This premium Titanium Grade 5 stock sheet offers exceptional strength-to-weight ratio and superior corrosion resistance, making it ideal for high-performance pneumatic systems and demanding industrial environments.
| Standard | DIN 933 |
| Material | Titanium Grade 5 |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.179" |
| Length | 36" |
| Width | 34" |
Built to exacting engineering tolerances, this Titanium Grade 5 (Ti-6Al-4V) stock sheet measures 0.179 inches in thickness, 36 inches in length, and 34 inches in width. This alloy provides an excellent combination of high strength, low density, excellent corrosion resistance, and good weldability, crucial for applications requiring high reliability and durability under extreme conditions. Its biocompatibility and resistance to fatigue failure further enhance its suitability for critical pneumatic components.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free of contaminants before fabrication. 2. Utilize appropriate cutting tools designed for titanium alloys to maintain dimensional accuracy. 3. Follow established welding procedures for Titanium Grade 5 if joining is required, ensuring proper shielding gas.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel cutting tools, which can lead to excessive heat and material deformation. | Employ carbide or diamond-tipped cutting tools with adequate coolant lubrication for titanium. |
| Inadequate preparation of weld joints, resulting in porosity or incomplete fusion. | Thoroughly clean and prepare weld edges, and use argon or helium shielding gas during welding. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: High-pressure pneumatic cylinders, Valve bodies and components, Aerospace pneumatic ducting.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||