This Titanium Grade 5 stock sheet provides superior strength-to-weight ratio and exceptional corrosion resistance. Precisely manufactured for critical applications in aerospace, medical, and industrial sectors requiring robust performance.
| Standard | DIN 933 |
| Material | Titanium Grade 5 |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.137" |
| Length | 30" |
| Width | 30" |
Built to exacting engineering tolerances, this 0.137" thick Titanium Grade 5 (Ti-6Al-4V) stock sheet offers a nominal length and width of 30" x 30". Renowned for its excellent biocompatibility, high tensile strength (over 130 ksi), and superior fatigue resistance, it is ideal for components subjected to extreme stress and corrosive environments. Its low density (approximately 4.5 g/cm³) makes it a prime material for weight-sensitive designs.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the cutting or shaping equipment is calibrated for high-strength alloys. 2. Perform necessary cuts or fabrications to meet design specifications, maintaining coolant flow to prevent overheating. 3. Inspect finished components for dimensional accuracy and surface integrity as per engineering drawings.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard tooling without appropriate adjustments for titanium's hardness. | Employ specialized cutting tools with appropriate geometries, speeds, and feeds, and utilize effective lubrication to prevent premature tool wear and improve surface finish. |
| Inadequate consideration of thermal expansion during welding or heat treatment. | Implement controlled welding procedures and pre/post-heating techniques to mitigate residual stresses and distortion caused by titanium's thermal expansion characteristics. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Aerospace structural components, Medical implants and surgical instruments, High-performance sporting goods, Chemical processing equipment, Marine hardware.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||