This Titanium Grade 5 stock sheet offers exceptional strength-to-weight ratio and unparalleled corrosion resistance. Ideal for fabricating critical components in harsh environments where reliability is paramount.
| Standard | ASTM A106 |
| Material | Titanium Grade 5 |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.124" |
| Length | 19" |
| Width | 35" |
A high-performance industrial component, this Titanium Grade 5 stock sheet, also known as Ti-6Al-4V, boasts a nominal composition of 6% aluminum and 4% vanadium. With dimensions of 0.124 inches (3.15 mm) in thickness, 19 inches (482.6 mm) in width, and 35 inches (889 mm) in length, it exhibits a tensile strength of approximately 130,000 psi and a yield strength of 120,000 psi. Its passivation layer provides excellent resistance to oxidation and a wide range of corrosive media, making it suitable for aerospace, medical implants, and chemical processing equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the fabrication area is clean and free from contaminants. 2. Precisely cut the sheet to the required dimensions using appropriate tooling designed for titanium. 3. Perform any necessary welding, machining, or forming operations according to industry best practices for Ti-6Al-4V.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not rated for titanium alloys. | Employ carbide or high-speed steel tooling with appropriate speeds and feeds to prevent tool breakage and ensure clean cuts. |
| Inadequate post-fabrication cleaning. | Thoroughly degrease and clean all surfaces after fabrication to maintain the material's inherent corrosion resistance. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Aerospace structural components, Biomedical implants, Chemical processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||