This high-performance Titanium Grade 5 stock sheet offers exceptional strength-to-weight ratio and corrosion resistance. Precisely manufactured to exacting standards for critical applications.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.085" |
| Length | 16" |
| Width | 32" |
Manufactured under strict quality controls, this Titanium Grade 5 (Ti-6Al-4V) stock sheet measures 0.085 inches in thickness, 16 inches in width, and 32 inches in length. Exhibiting a minimum tensile strength of 128 ksi and a yield strength of 116 ksi, this alloy provides superior biocompatibility, excellent fatigue strength, and high resistance to saltwater corrosion. Its operational temperature range extends to approximately 600°F (315°C).
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface is clean and free of contaminants. 2. Precisely cut to the required dimensions using appropriate tooling. 3. Fabricate or attach according to design specifications, considering welding or joining procedures for titanium. 4. Perform post-fabrication inspection to verify dimensional accuracy and integrity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for titanium alloys. | Employ carbide or diamond-tipped cutting tools with appropriate speeds and feeds to prevent overheating and tool wear. |
| Inadequate surface preparation before joining or coating. | Thoroughly degrease and mechanically clean the titanium surface to ensure optimal adhesion and structural integrity. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Aerospace structural components, Medical implants and surgical instruments, High-performance marine hardware.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||