This Titanium Grade 5 stock sheet offers exceptional strength, corrosion resistance, and a low density. Precisely manufactured to meet demanding industrial requirements, it's ready for fabrication into critical components.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.033" |
| Length | 40" |
| Width | 15" |
Engineered for reliability and performance, this Titanium Grade 5 (Ti-6Al-4V) stock sheet measures 0.033 inches in thickness, 40 inches in length, and 15 inches in width. It boasts a minimum tensile strength of 128,000 psi and yield strength of 120,000 psi, coupled with excellent fatigue strength and biocompatibility. This alloy is widely recognized for its outstanding corrosion resistance in aggressive environments. Suitable for machining, welding, and forming, it is a preferred material for aerospace structures, medical implants, and demanding industrial equipment where weight savings and durability are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure proper handling to avoid surface damage. 2. Verify material compatibility with surrounding components. 3. Follow established fabrication procedures for Titanium Grade 5, including appropriate welding and machining techniques.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel cutting tools without proper lubrication or cooling. | Employ specialized carbide or cobalt tooling with high-speed steel and flood coolant to prevent overheating and tool wear. |
| Inadequate preparation of weld surfaces, leading to porosity or incomplete fusion. | Thoroughly clean and degrease weld joint areas to remove all contaminants before welding with inert gas shielding. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Aerospace structural components, Medical implants and surgical instruments, High-performance marine hardware.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||