This industrial O-ring, crafted from high-performance silicone and encased in Titanium Grade 5, offers exceptional sealing integrity. Engineered for extreme environments and superior chemical resistance.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 0.125" |
| Outside Diameter | 10.214" |
| Cross Section | 0.167" |
Precision-manufactured to tight tolerances, this industrial O-ring features an Inside Diameter of 0.125 inches, an Outside Diameter of 10.214 inches, and a Cross Section of 0.167 inches. The silicone elastomer provides excellent flexibility and a wide operating temperature range, while the Titanium Grade 5 (Ti-6Al-4V) casing imparts unparalleled corrosion resistance against aggressive chemicals and high pressures. This combination makes it ideal for aerospace, medical, and chemical processing applications where material inertness and extreme durability are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove is clean and free of debris. 2. Lightly lubricate the O-ring with a compatible lubricant. 3. Carefully install the O-ring into the groove, avoiding overstretching or cutting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect lubrication that degrades silicone. | Utilize only silicone-based or perfluoropolyether (PFPE) lubricants compatible with silicone elastomers. |
| Forcing installation and damaging the O-ring or groove. | Apply gentle, even pressure during installation, ensuring the O-ring seats properly without undue stress. |
A: This Industrial O-Ring, Silicone is manufactured from Titanium Grade 5.
A: Aerospace fluid systems, Medical device seals, Chemical processing equipment, High-temperature sealing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||