Engineered for extreme performance, this Industrial Silicone O-Ring, crafted from Titanium Grade 5, offers exceptional sealing in demanding environments. Its robust material ensures longevity and reliability under duress.
| Standard | ASTM A106 |
| Material | Titanium Grade 5 |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 9.291" |
| Outside Diameter | 0.755" |
| Cross Section | 0.140" |
Purpose-built for heavy-duty applications, this industrial O-ring utilizes a premium Silicone elastomer matrix reinforced with the superior strength and corrosion resistance of Titanium Grade 5. With an inside diameter of 9.291 inches, an outside diameter of 0.755 inches, and a precise 0.140-inch cross-section, it is engineered to maintain seal integrity under extreme temperature fluctuations, aggressive chemical exposure, and high-pressure conditions. The inherent biocompatibility and non-reactivity of both silicone and titanium make it suitable for critical applications where purity and performance are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean, dry, and free from debris. 2. Carefully inspect the O-ring for any damage or defects before installation. 3. Gently place the O-ring into its designated groove, avoiding stretching or twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-stretching the O-ring during installation. | Install the O-ring without excessive tension to prevent premature failure and loss of sealing capability. |
| Using incompatible lubricants or cleaning agents. | Consult material compatibility charts to ensure lubricants and cleaning agents are suitable for silicone and titanium. |
A: This Industrial O-Ring, Silicone is manufactured from Titanium Grade 5.
A: Aerospace sealing components, Medical device assemblies, High-temperature industrial processing equipment, Corrosive chemical fluid handling.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||