This high-performance industrial O-ring, crafted from robust Grade 5 Titanium and Silicone, ensures superior sealing integrity. Its precise dimensions guarantee a reliable fit for demanding applications.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 8.417" |
| Outside Diameter | 10.558" |
| Cross Section | 0.087" |
Precision-manufactured to tight tolerances, this industrial O-ring features an 8.417-inch inside diameter, a 10.558-inch outside diameter, and a 0.087-inch cross-section. Constructed from a specialized blend of Grade 5 Titanium and high-grade Silicone, it offers exceptional resistance to extreme temperatures (-60°C to +230°C), aggressive chemicals, and UV radiation. This combination of materials provides superior durability, flexibility, and sealing performance in harsh industrial environments where reliability is paramount. Its low outgassing properties make it ideal for vacuum applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Thoroughly clean the mating groove and sealing surfaces to remove any debris, oil, or contaminants. 2. Inspect the O-ring for any signs of damage or defects before installation. 3. Carefully install the O-ring into the groove, ensuring it is seated evenly and not twisted. Lubrication with a compatible, non-hardening silicone grease may be beneficial for larger diameters or tight grooves.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Installing a damaged or defective O-ring. | Always visually inspect the O-ring for nicks, cuts, or embedded particles before installation. Replace if any damage is found. |
| Over-stretching or twisting the O-ring during installation. | Handle the O-ring with care. Use appropriate tools if necessary and ensure it sits flat in the groove without being stretched excessively or rolled. |
| Using incompatible lubricants. | Only use lubricants specifically rated as compatible with both Silicone and Titanium Grade 5. Incompatible lubricants can degrade the O-ring and compromise the seal. |
A: This Industrial O-Ring, Silicone is manufactured from Titanium Grade 5.
A: Aerospace and Aviation Sealing, High-Temperature Chemical Processing, Vacuum Equipment Seals.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||