This industrial O-ring, crafted from premium Titanium Grade 5 silicone, offers exceptional sealing in demanding applications. Its robust construction ensures superior performance and longevity under extreme conditions.
| Standard | ASTM A106 |
| Material | Titanium Grade 5 |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 6.384" |
| Outside Diameter | 8.117" |
| Cross Section | 0.074" |
Engineered for reliability and performance, this industrial O-ring features a precise Inside Diameter of 6.384 inches, an Outside Diameter of 8.117 inches, and a Cross Section of 0.074 inches. The substrate material, Titanium Grade 5 (Ti-6Al-4V), provides exceptional strength-to-weight ratio, excellent corrosion resistance, and biocompatibility, making it ideal for aerospace, medical, and chemical processing industries. The silicone elastomer offers a wide operating temperature range and excellent flexibility. This combination ensures a leak-proof seal in high-pressure and high-temperature environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure sealing surfaces are clean, dry, and free from burrs or foreign matter. 2. Carefully place the O-ring into the designated groove, avoiding excessive stretching or twisting. 3. Apply a thin, compatible lubricant to the O-ring and sealing surface for easier assembly and to prevent damage during compression.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-stretching the O-ring during installation. | Gently ease the O-ring into the groove, using minimal force to avoid permanent deformation. |
| Using incompatible lubricants or solvents. | Consult material compatibility charts for the specific silicone and application environment to select an appropriate lubricant. |
| Installing the O-ring on damaged or contaminated sealing surfaces. | Thoroughly inspect and clean all mating surfaces prior to O-ring installation. |
A: This Industrial O-Ring, Silicone is manufactured from Titanium Grade 5.
A: Aerospace fluid systems, High-vacuum applications, Biocompatible medical devices, Corrosive chemical processing, High-temperature reactor seals.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||