Engineered for critical sealing applications, this industrial silicone O-ring is constructed from premium Titanium Grade 5. It delivers exceptional performance in demanding environments requiring robust chemical and thermal resistance.
| Standard | DIN 933 |
| Material | Titanium Grade 5 |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 5.797" |
| Outside Diameter | 5.439" |
| Cross Section | 0.244" |
Built to exacting engineering tolerances, this industrial O-ring boasts an Inside Diameter of 5.797", an Outside Diameter of 5.439", and a precise Cross Section of 0.244". The use of Titanium Grade 5 for the O-ring material is highly unconventional and indicates a specialized application where extreme strength, biocompatibility, and inertness are paramount, often found in aerospace, medical implants, or highly corrosive chemical processing. This unique combination offers superior mechanical integrity and resistance to a broad spectrum of aggressive media and extreme temperatures, ensuring a reliable seal under the most challenging conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure both mating surfaces and the O-ring are clean and free of debris. 2. Carefully stretch or compress the O-ring to fit within its designated groove or over the shaft. 3. Verify the O-ring is seated correctly and evenly within the groove without twisting or pinching.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening the assembly, which can over-compress the O-ring and lead to premature failure. | Follow manufacturer torque specifications for the assembly. Ensure the O-ring is not pinched or excessively compressed. |
| Using improper lubrication or no lubrication, causing friction and potential damage during installation. | Apply a small amount of compatible lubricant to the O-ring and mating surfaces to facilitate installation and prevent damage. |
A: This Industrial O-Ring, Silicone is manufactured from Titanium Grade 5.
A: Aerospace fluid systems, Medical device sealing, High-purity chemical processing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||