This industrial-grade silicone O-ring, constructed from premium Titanium Grade 5, offers exceptional sealing integrity and chemical resistance. Engineered for demanding applications, it ensures reliable performance under extreme conditions.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 3.092" |
| Outside Diameter | 5.086" |
| Cross Section | 0.190" |
Trusted by engineers across multiple sectors, this Silicone O-ring boasts a precise Inside Diameter of 3.092 inches, an Outside Diameter of 5.086 inches, and a Cross Section of 0.190 inches. The material, Titanium Grade 5, is chosen for its superior strength-to-weight ratio, excellent corrosion resistance in aggressive chemical environments, and wide operating temperature range. This combination makes it ideal for critical sealing in aerospace, medical, and high-temperature industrial fluid systems where inertness and durability are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Inspect the O-ring for any damage or debris prior to installation. 2. Ensure the mating groove surfaces are clean, dry, and free from burrs or sharp edges. 3. Carefully install the O-ring into the groove, avoiding stretching or twisting, and ensure it is properly seated.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Installing a stretched or twisted O-ring. | Handle the O-ring carefully and ensure it is seated flat within the groove without any distortion. |
| Failing to clean the groove surfaces. | Thoroughly clean and inspect the groove for any contaminants, burrs, or sharp edges that could damage the O-ring. |
A: This Industrial O-Ring, Silicone is manufactured from Titanium Grade 5.
A: Aerospace hydraulic systems, High-temperature chemical processing equipment, Medical device sealing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||