Engineered for extreme environments, this industrial silicone O-ring boasts a Grade 5 Titanium core for unparalleled strength and corrosion resistance. Ensures reliable sealing under demanding conditions.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 2.653" |
| Outside Diameter | 6.981" |
| Cross Section | 0.167" |
A high-performance industrial component, this O-ring features an Inside Diameter of 2.653 inches, an Outside Diameter of 6.981 inches, and a Cross Section of 0.167 inches. The core material, Titanium Grade 5, provides exceptional strength-to-weight ratio, superior corrosion resistance in aggressive media, and maintains integrity across a broad temperature spectrum. The silicone elastomer offers excellent flexibility, high tensile strength, and resistance to ozone, UV, and extreme temperatures, making it ideal for aerospace, medical, and chemical processing applications where reliability is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Thoroughly clean both the groove and the O-ring to remove any debris or contaminants. 2. Carefully inspect the O-ring for any nicks, cuts, or imperfections before installation. 3. Apply a thin, even layer of compatible lubricant to the O-ring and the groove to facilitate smooth insertion and prevent damage.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, which can cut or deform the O-ring. | Apply a compatible lubricant and use controlled, even pressure to seat the O-ring correctly. |
| Installing a damaged or improperly sized O-ring, leading to immediate seal failure. | Always inspect the O-ring for defects and verify correct dimensions against the application's specifications before installation. |
A: This Industrial O-Ring, Silicone is manufactured from Titanium Grade 5.
A: Aerospace fluid systems, High-temperature chemical processing, Medical equipment sterilization.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||