This industrial O-ring, crafted from premium Titanium Grade 5 silicone, delivers exceptional sealing integrity. Its precise dimensions ensure a reliable fit for critical applications requiring robust chemical and thermal resistance.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 3.858" |
| Outside Diameter | 7.263" |
| Cross Section | 0.198" |
Built to exacting engineering tolerances, this Silicone O-ring features an Inside Diameter of 3.858 inches, an Outside Diameter of 7.263 inches, and a precise Cross Section of 0.198 inches. The use of Titanium Grade 5 silicone, renowned for its excellent temperature resistance (typically -60°C to +230°C) and broad chemical inertness, makes this seal ideal for applications involving aggressive media, high temperatures, and vacuum conditions. Its inherent biocompatibility and low outgassing properties also lend themselves to specialized uses in the food, medical, and semiconductor industries where purity and reliability are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean, dry, and free from debris. 2. Carefully install the O-ring, avoiding any stretching or twisting. 3. Verify proper seating and gland compression upon assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-stretching during installation. | Install the O-ring without excessive tension; it should seat into the gland with minimal distortion. |
| Using incompatible lubricants or cleaning agents. | Consult material compatibility charts to ensure lubricants and cleaning agents do not degrade the Titanium Grade 5 silicone. |
A: This Industrial O-Ring, Silicone is manufactured from Titanium Grade 5.
A: High-temperature fluid power systems, Chemical processing equipment, Aerospace and automotive seals, Medical device sterilization equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||