This industrial-grade Silicone O-Ring, constructed from premium Titanium Grade 5, offers exceptional chemical resistance and thermal stability. Engineered for superior sealing in critical applications.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 2.011" |
| Outside Diameter | 5.224" |
| Cross Section | 0.266" |
Precision-manufactured to tight tolerances, this Silicone O-Ring boasts an Inside Diameter of 2.011 inches, an Outside Diameter of 5.224 inches, and a Cross Section of 0.266 inches. The integration of Titanium Grade 5 (Ti-6Al-4V) into its formulation provides unparalleled strength-to-weight ratio, excellent corrosion resistance, and superior performance across a wide temperature range (-50°C to +250°C). This material combination makes it ideal for high-pressure systems, aerospace, medical devices, and chemical processing where aggressive media and extreme conditions are prevalent.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating grooves are clean, free of debris, and properly dimensioned. 2. Carefully install the O-ring, avoiding any sharp tools that could nick or cut the sealing surface. 3. Apply a light, compatible lubricant if necessary for easier installation and to prevent initial tearing.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to stretching or tearing of the O-ring. | Install the O-ring gently, using appropriate tools to guide it into the groove. If resistance is met, re-evaluate the groove dimensions and O-ring compatibility. |
| Contamination of the O-ring or mating surfaces with incompatible lubricants or debris. | Always use lubricants specified as compatible with Silicone and Titanium Grade 5. Thoroughly clean all surfaces before assembly. |
A: This Industrial O-Ring, Silicone is manufactured from Titanium Grade 5.
A: Aerospace fluid and gas handling systems, High-temperature and high-pressure chemical reactors, Medical implantable devices requiring inertness.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||