Engineered for extreme operational demands, this industrial O-ring combines the superior biocompatibility and corrosion resistance of Titanium Grade 5 with the flexible, high-temperature sealing capabilities of silicone. Ensures reliable performance in critical applications.
| Standard | ASTM A106 |
| Material | Titanium Grade 5 |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 1.251" |
| Outside Diameter | 7.971" |
| Cross Section | 0.189" |
A high-performance industrial component, this O-ring is precision manufactured with an Inside Diameter of 1.251 inches, an Outside Diameter of 7.971 inches, and a Cross Section of 0.189 inches. The material, Titanium Grade 5, offers exceptional strength-to-weight ratio, excellent corrosion resistance, and biocompatibility, making it suitable for demanding aerospace, medical, and chemical processing environments where extreme temperature variations and aggressive media are present. The silicone elastomer provides flexibility and resilience across a wide temperature range, ensuring a robust seal.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean, free of debris, and properly dimensioned. 2. Lightly lubricate the O-ring with a compatible lubricant if recommended for the application. 3. Carefully install the O-ring into the groove, avoiding stretching or twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening the assembly, leading to O-ring extrusion or permanent deformation. | Tighten fasteners to the manufacturer's specified torque values to prevent over-compression of the O-ring. |
| Using incompatible lubricants that degrade the silicone material. | Consult compatibility charts and use only lubricants specifically approved for silicone elastomers and the operating environment. |
A: This Industrial O-Ring, Silicone is manufactured from Titanium Grade 5.
A: Aerospace Fluid Systems, Medical Device Sealing, Chemical Processing Equipment, High-Temperature Reactors.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||