This industrial O-ring, crafted from high-performance Silicone and housed in Titanium Grade 5, offers exceptional sealing in extreme environments. Its precise dimensions ensure reliable performance where conventional materials fail.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 2.259" |
| Outside Diameter | 0.868" |
| Cross Section | 0.115" |
Precision-manufactured to tight tolerances, this Silicone O-ring exhibits superior chemical resistance and a broad operating temperature range, ideal for aerospace, medical, and high-vacuum applications. The substrate material, Titanium Grade 5 (Ti-6Al-4V), provides exceptional strength-to-weight ratio and biocompatibility, ensuring long-term integrity and reliability. With an Inside Diameter of 2.259 inches, an Outside Diameter of 0.868 inches, and a Cross Section of 0.115 inches, this seal is engineered for critical sealing duties where material purity and resilience are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure both sealing surfaces are clean, dry, and free from debris or damage. 2. Carefully lubricate the O-ring with a compatible, low-outgassing lubricant if recommended for the application. 3. Gently install the O-ring into its groove, ensuring it is seated properly without twisting or pinching.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to O-ring damage. | Apply lubricant and install with controlled, even pressure. Avoid sharp tools. |
| Selecting an O-ring material incompatible with the fluid or environment. | Consult chemical compatibility charts and application-specific requirements before selection. |
A: This Industrial O-Ring, Silicone is manufactured from Titanium Grade 5.
A: Aerospace fluid and gas systems, High-vacuum chamber seals, Biocompatible medical equipment seals.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||