Premium Titanium Grade 5 stock sheet, precisely manufactured to 0.337" thickness, 22" width, and 43" length. Engineered for exceptional strength-to-weight ratio and superior corrosion resistance, meeting stringent industry demands.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.337" |
| Length | 22" |
| Width | 43" |
Specified by design engineers worldwide, this Titanium Grade 5 (Ti-6Al-4V) stock sheet offers an optimal combination of high strength, excellent corrosion resistance, and low density. With dimensions of 0.337 inches (8.56 mm) thickness, 22 inches (558.8 mm) width, and 43 inches (1092.2 mm) length, it is well-suited for demanding applications in aerospace, medical implants, marine environments, and high-performance sporting goods where reliability under extreme conditions is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure proper material handling to prevent contamination and surface damage. 2. Utilize appropriate cutting and forming tools designed for titanium alloys. 3. Follow recommended welding procedures for Titanium Grade 5 if joining is required.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel tooling for cutting or forming. | Employ specialized carbide or diamond-coated tooling designed for titanium alloys to prevent premature tool wear and ensure clean cuts. |
| Inadequate post-weld heat treatment for critical applications. | Implement recommended post-weld heat treatment cycles to restore mechanical properties and relieve residual stresses, especially for aerospace or medical applications. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Aerospace structural components, Medical implants and surgical instruments, Marine hardware and offshore equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||