This Titanium Grade 5 stock sheet offers exceptional strength-to-weight ratio and superior corrosion resistance, making it ideal for high-performance pneumatic components and systems.
| Standard | ASTM A106 |
| Material | Titanium Grade 5 |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.143" |
| Length | 18" |
| Width | 46" |
Specified by design engineers worldwide, this Titanium Grade 5 (Ti-6Al-4V) stock sheet, measuring 0.143 inches thick by 18 inches wide and 46 inches long, provides superior mechanical properties for critical pneumatic applications. Its excellent tensile strength (typically 120-130 ksi) and yield strength (typically 110-120 ksi) ensure durability under high pressure and stress. The material's inherent biocompatibility and resistance to a wide range of corrosive media, including saltwater and aggressive chemicals, makes it a preferred choice for environments where reliability and longevity are paramount. Furthermore, its low density (approximately 0.163 lb/in³) contributes to weight reduction in complex assemblies.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure surface is clean and free of contaminants. 2. Precisely cut sheet to required dimensions using appropriate cutting tools for titanium. 3. Fabricate components per design specifications, adhering to welding or joining procedures suitable for Titanium Grade 5.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel cutting tools without proper setup, leading to tool wear and suboptimal cut quality. | Employ specialized carbide or diamond-tipped cutting tools designed for titanium alloys and utilize appropriate speeds and feeds to prevent overheating and maintain cut integrity. |
| Inadequate surface preparation before joining or coating, compromising adhesion and long-term performance. | Thoroughly degrease and abrade the surface using non-contaminating methods. Consider a passivation treatment for critical applications. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: High-pressure pneumatic cylinder bodies, Corrosion-resistant valve components, Lightweight actuator housings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||