This Titanium Grade 5 stock sheet offers exceptional strength-to-weight ratio and corrosion resistance. Precisely manufactured to 0.345" thickness, 30" width, and 40" length, it's engineered for critical applications demanding the highest material integrity and performance.
| Standard | DIN 933 |
| Material | Titanium Grade 5 |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.345" |
| Length | 30" |
| Width | 40" |
Manufactured under strict quality controls, this Titanium Grade 5 (Ti-6Al-4V) stock sheet boasts a thickness of 0.345 inches, a width of 40 inches, and a length of 30 inches. Grade 5 titanium is a dual-phase alloy with excellent mechanical properties, including high tensile strength, fatigue strength, and fracture toughness, along with superior biocompatibility and corrosion resistance. These characteristics make it the material of choice for aerospace structural components, medical implants, high-performance automotive parts, and demanding industrial equipment where reliability under extreme conditions is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure cutting equipment is calibrated for precise tolerances and appropriate for titanium alloy processing. 2. Securely fasten the sheet to prevent movement during the sawing or cutting operation. 3. Employ recommended cutting speeds and lubrication to minimize heat buildup and ensure a clean cut.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for titanium alloys. | Utilize carbide or high-speed steel tooling specifically rated for cutting titanium to prevent premature wear and achieve optimal results. |
| Insufficient lubrication during cutting. | Apply a high-quality cutting fluid or coolant to the cutting zone to dissipate heat, extend tool life, and improve surface finish. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Aerospace structural components, Medical implants and surgical instruments, High-performance marine and automotive parts.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||