This Titanium Grade 5 stock sheet offers exceptional strength-to-weight ratio and corrosion resistance. Precisely manufactured to exacting standards, it is the material of choice for critical fabricating applications.
| Standard | ASTM A106 |
| Material | Titanium Grade 5 |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.574" |
| Length | 39" |
| Width | 40" |
Specified by design engineers worldwide, this Titanium Grade 5 (Ti-6Al-4V) stock sheet provides a superior combination of high strength, low density, and excellent corrosion resistance. With a nominal thickness of 0.574 inches, a length of 39 inches, and a width of 40 inches, it is manufactured to meet stringent industry specifications. Its biocompatibility and fatigue strength make it indispensable for aerospace components, medical implants, and high-performance industrial equipment demanding reliability under extreme conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material certification and dimensions against design requirements. 2. Ensure proper handling and cutting equipment suitable for titanium alloys. 3. Follow industry-standard welding or joining procedures for Titanium Grade 5 if required.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel cutting tools which can lead to rapid tool wear and overheating. | Employ specialized carbide or high-speed steel tooling designed for titanium alloys, utilizing appropriate speeds and feeds with coolant. |
| Inadequate surface preparation before welding, leading to contamination and compromised weld integrity. | Thoroughly degrease and mechanically clean the weld joint area, followed by inert gas purging during the welding process. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Aerospace structural components, Biomedical implants and devices, High-performance marine hardware.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||