This Titanium Grade 5 stock sheet is engineered for extreme performance. Its superior strength-to-weight ratio and exceptional corrosion resistance make it ideal for critical aerospace, medical, and industrial applications.
| Standard | ASTM A106 |
| Material | Titanium Grade 5 |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.472" |
| Length | 34" |
| Width | 34" |
A high-performance industrial component, this Titanium Grade 5 (Ti-6Al-4V) stock sheet offers a thickness of 0.472 inches, a length of 34 inches, and a width of 34 inches. Renowned for its exceptional strength, low density, and outstanding biocompatibility, Grade 5 titanium provides superior resistance to a wide range of corrosive environments, including saltwater and various chemicals. This makes it a preferred material for applications demanding high reliability and longevity under severe operating conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the fabrication area is clean and free of contaminants. 2. Utilize appropriate cutting and forming tools designed for titanium alloys. 3. Employ proper welding techniques, typically Gas Tungsten Arc Welding (GTAW) in an inert atmosphere, to maintain material integrity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel tooling for cutting or forming. | Employ carbide-tipped or diamond-coated tooling and ensure adequate lubrication to prevent excessive heat buildup and tool wear. |
| Inadequate shielding during welding, leading to contamination. | Always weld Titanium Grade 5 in a controlled inert gas environment (argon or helium) to prevent embrittlement from oxygen and nitrogen. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Aerospace structural components, Biomedical implants and surgical instruments, High-performance marine hardware.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||