This Titanium Grade 5 stock sheet offers superior strength-to-weight ratio and corrosion resistance, ideal for critical fabricating applications demanding reliability and longevity in harsh environments.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.672" |
| Length | 27" |
| Width | 22" |
Purpose-built for heavy-duty applications, this Titanium Grade 5 stock sheet measures 0.672 inches in thickness, 27 inches in length, and 22 inches in width. Composed of approximately 90% titanium, 6% aluminum, and 4% vanadium (Ti-6Al-4V), it exhibits an exceptional tensile strength exceeding 130 ksi and a yield strength of 120 ksi, coupled with outstanding corrosion resistance in oxidizing and mildly reducing environments. Its biocompatibility also makes it suitable for specialized medical device fabrication. This material is commonly employed in aerospace components, marine structures, and high-performance automotive parts where extreme conditions are encountered.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure proper cutting tools rated for titanium alloys are utilized. 2. Prepare surfaces for welding or joining by thorough degreasing and removal of any oxide layers. 3. Follow established welding procedures for Titanium Grade 5, typically involving inert gas shielding (e.g., Argon) and controlled heat input to prevent embrittlement.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel cutting tools, leading to excessive wear and poor cut quality. | Employ carbide-tipped or diamond-coated cutting tools specifically designed for hard metals like titanium. |
| Inadequate surface preparation before welding, resulting in weld defects and compromised joint integrity. | Thoroughly clean and mechanically abrade the weld joint area immediately before welding to remove surface contamination. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Aerospace structural components, Marine exhaust systems and hardware, High-performance automotive exhaust manifolds.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||