This premium Titanium Grade 5 stock sheet, precisely dimensioned at 0.537" x 34" x 12", offers exceptional strength, low density, and superior corrosion resistance, ideal for demanding applications.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.537" |
| Length | 34" |
| Width | 12" |
Specified by design engineers worldwide, this Titanium Grade 5 (Ti-6Al-4V) sheet offers a nominal thickness of 0.537 inches, a length of 34 inches, and a width of 12 inches. Exhibiting a minimum tensile strength of 120 ksi and yield strength of 110 ksi, its 6% aluminum and 4% vanadium composition provides an optimal balance of strength, fracture toughness, and weldability. This alloy is critical for aerospace components, medical implants, and high-performance industrial equipment requiring reliable performance in extreme environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material meets all project specifications and quality certifications. 2. Prepare cutting surfaces with appropriate safety equipment and tools. 3. Fabricate or machine to precise design requirements, adhering to industry best practices for titanium alloys.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper tool selection for machining titanium. | Utilize carbide or ceramic tooling with high-speed steel at lower feed rates and ample coolant to prevent excessive heat buildup and tool wear. |
| Inadequate surface preparation prior to welding. | Thoroughly degrease and mechanically clean the weld area to remove any oxides or contaminants, followed by inert gas purging during the welding process. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Aerospace structural components, Medical implants and surgical instruments, High-performance automotive parts.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||