This Titanium Grade 5 stock sheet provides exceptional strength-to-weight ratio and superior corrosion resistance. Engineered for precision, it's the ideal substrate for demanding abrading and polishing operations in critical industries.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.143" |
| Length | 42" |
| Width | 22" |
Built to exacting engineering tolerances, this 0.143-inch thick Titanium Grade 5 (Ti-6Al-4V) sheet offers a length of 42 inches and a width of 22 inches. Exhibiting a tensile strength of approximately 130 ksi and a yield strength of 120 ksi, it maintains excellent performance across a wide temperature range. Its inherent biocompatibility and resistance to saltwater and aggressive chemicals make it suitable for aerospace, medical device fabrication, and high-performance marine components where surface integrity is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface of the Titanium Grade 5 sheet is thoroughly cleaned and free from any contaminants. 2. Position the sheet within the designated fixturing or mounting system, ensuring proper alignment for the intended abrading or polishing process. 3. Secure the sheet firmly to prevent movement during operation, verifying stability against anticipated mechanical forces.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using abrasive media that is too coarse for the desired surface finish on Titanium Grade 5. | Select abrasive media grades (e.g., grit size) appropriate for achieving the specific surface finish (Ra values) required for the application, progressing from coarser to finer grits as needed. |
| Insufficient cooling during abrasive processes leading to thermal damage or altered material properties. | Implement robust cooling systems (e.g., flood coolants, misting systems) to maintain optimal surface temperatures, preventing heat-induced discoloration or structural changes in the titanium. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Precision surface finishing for aerospace components, Abrasion-resistant coatings in medical implants, High-performance marine hardware fabrication.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||