This Titanium Grade 5 stock sheet offers exceptional strength-to-weight ratio and corrosion resistance. Precisely manufactured to 0.057" thickness, 42" length, and 21" width, it's engineered for demanding fabrication applications.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.057" |
| Length | 42" |
| Width | 21" |
Trusted by engineers across multiple sectors, this Titanium Grade 5 (Ti-6Al-4V) stock sheet exhibits superior mechanical properties, including a high yield strength and excellent fatigue resistance. Its 0.057" thickness, 42" length, and 21" width make it ideal for intricate component fabrication in aerospace, medical implants, and high-performance automotive applications where biocompatibility and extreme durability are paramount. This alloy also provides excellent weldability and formability.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure proper cutting and shaping tools are calibrated for titanium. 2. Deburr all edges after cutting to prevent stress risers. 3. Follow established welding procedures for Ti-6Al-4V if joining is required, utilizing inert gas shielding.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel cutting tools, leading to premature wear and poor cut quality. | Employ carbide or diamond-tipped cutting tools specifically designed for titanium alloys, and utilize appropriate coolants. |
| Inadequate edge preparation before welding, resulting in porosity and reduced weld integrity. | Thoroughly clean and prepare weld joint edges with a dedicated stainless steel brush to remove any surface contaminants or oxides. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Aerospace structural components, Medical implants and surgical instruments, High-performance automotive parts.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||