This Titanium Grade 5 stock sheet offers exceptional strength-to-weight ratio and corrosion resistance. Precisely manufactured to 0.271" thickness, 24" length, and 34" width for demanding industrial and critical applications.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.271" |
| Length | 24" |
| Width | 34" |
Purpose-built for heavy-duty applications, this Titanium Grade 5 (Ti-6Al-4V) stock sheet delivers superior mechanical properties. With a thickness of 0.271 inches, a length of 24 inches, and a width of 34 inches, it provides ample material for complex fabrication. This alloy exhibits an excellent balance of high tensile strength, toughness, and fatigue resistance, coupled with outstanding corrosion resistance in various environments. Its biocompatibility makes it suitable for medical implants, while its lightweight nature and strength are critical for aerospace structures and performance automotive components. Machinability is good with appropriate tooling and speeds.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure proper cutting tools and techniques are employed for Titanium Grade 5. 2. Deburr all cut edges to prevent stress concentrations. 3. Clean the sheet thoroughly to remove any contaminants before further processing or assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for titanium alloys. | Utilize carbide or high-speed steel tooling with appropriate geometry and coolant for titanium machining. |
| Overheating the material during cutting, leading to work hardening. | Maintain consistent feed rates and utilize effective lubrication and cooling to manage heat buildup. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Aerospace structural components, Medical implants and devices, High-performance automotive parts, Chemical processing equipment, Marine hardware.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||