This Titanium Grade 5 stock sheet offers exceptional strength-to-weight ratio and corrosion resistance. Precisely manufactured to meet demanding industrial specifications for critical component fabrication.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.826" |
| Length | 27" |
| Width | 22" |
Engineered for reliability and performance, this Titanium Grade 5 (Ti-6Al-4V) stock sheet boasts a substantial thickness of 0.826 inches, a generous length of 27 inches, and a width of 22 inches. Its alloy composition delivers superior tensile strength, fatigue resistance, and excellent biocompatibility, making it suitable for high-stress environments and applications where material integrity is paramount. Typical uses include aerospace structural components, medical implants, marine hardware, and high-performance sporting goods.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify dimensions and surface finish against project requirements. 2. Clean sheet thoroughly using an approved degreaser to remove any contaminants. 3. Proceed with cutting, forming, or welding operations according to established welding procedures for Titanium Grade 5.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel cutting tools without proper cooling and lubrication. | Employ specialized carbide or high-speed steel cutting tools designed for titanium, ensuring adequate coolant flow and controlled cutting speeds to prevent tool wear and material overheating. |
| Inadequate pre-cleaning before welding or fabrication. | Thoroughly clean the titanium surface with a stainless steel brush and acetone or a dedicated titanium cleaner immediately prior to any welding or joining operation to prevent contamination and ensure weld integrity. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Aerospace structural components, Medical implants and surgical instruments, High-performance marine hardware.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||