This Titanium Grade 5 stock sheet offers exceptional strength-to-weight ratio and corrosion resistance, vital for critical safety components. Precisely manufactured for demanding environments.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.737" |
| Length | 48" |
| Width | 34" |
Manufactured under strict quality controls, this Titanium Grade 5 stock sheet measures 0.737 inches thick, 48 inches in length, and 34 inches in width. Titanium Grade 5 (Ti-6Al-4V) exhibits an excellent combination of high strength, low density, and outstanding corrosion resistance, making it ideal for aerospace, medical implants, and high-stress industrial applications. Its biocompatibility and fatigue strength ensure reliability in safety-critical structures and components where performance under extreme conditions is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure a clean and dry cutting surface. 2. Utilize appropriate cutting tools designed for high-strength alloys (e.g., waterjet, plasma, or abrasive saws). 3. Deburr all edges thoroughly to prevent stress risers.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel cutting tools which can lead to excessive heat and tool wear. | Employ carbide-tipped blades or specialized tooling for titanium alloys, ensuring adequate coolant is used. |
| Insufficient edge preparation after cutting, leaving sharp or rough edges. | Always deburr and chamfer edges to remove burrs and reduce stress concentrations that could lead to premature failure. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Aerospace structural components, High-pressure vessel fabrication, Corrosion-resistant safety equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||