This Titanium Grade 5 stock sheet is a premium raw material engineered for extreme environments. Its exceptional strength-to-weight ratio and biocompatibility make it ideal for critical applications where reliability is paramount.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.161" |
| Length | 23" |
| Width | 40" |
A high-performance industrial component, this Titanium Grade 5 (Ti-6Al-4V) sheet offers superior mechanical properties and excellent corrosion resistance. With a nominal thickness of 0.161 inches, a length of 23 inches, and a width of 40 inches, it provides a substantial surface area for fabrication. This alloy boasts a high tensile strength and yield strength, coupled with low density, making it a preferred choice for aerospace structures, medical implants, marine components, and demanding chemical processing equipment. Its excellent fatigue strength and biocompatibility further enhance its suitability for critical and long-term use applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure all cutting and forming tools are specifically designed for titanium alloys to prevent contamination and maintain material integrity. 2. Clean the surface thoroughly to remove any oils, dirt, or debris before welding or joining. 3. Follow recommended welding procedures for Titanium Grade 5, utilizing inert gas shielding (e.g., Argon) to prevent oxidation and embrittlement.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel cutting tools, leading to excessive heat and potential material degradation. | Employ carbide or diamond-tipped cutting tools and maintain adequate lubrication to manage heat buildup during machining. |
| Inadequate shielding gas during welding, resulting in porosity and reduced weld strength. | Utilize a high-purity Argon shielding gas flow rate appropriate for the weld joint configuration and thickness. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Aerospace structural components, Biocompatible medical implants (e.g., orthopedic, dental), High-performance marine hardware.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||