This Titanium Grade 5 stock sheet offers exceptional strength-to-weight ratio and corrosion resistance. Precisely manufactured to 0.508" thickness, 28" length, and 32" width, it meets stringent industry demands.
| Standard | ASTM A106 |
| Material | Titanium Grade 5 |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.508" |
| Length | 28" |
| Width | 32" |
Specified by design engineers worldwide, this Titanium Grade 5 (Ti-6Al-4V) stock sheet is a benchmark for high-performance applications. With dimensions of 0.508" thickness, 28" length, and 32" width, it provides a substantial material volume for complex fabrication. Its alloy composition delivers superior tensile strength, fatigue resistance, and biocompatibility, making it indispensable in aerospace structural components, medical implants, and demanding chemical processing equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material compliance with project specifications. 2. Implement appropriate cutting and shaping techniques suitable for titanium alloys. 3. Ensure proper welding or joining procedures are followed to maintain material integrity and strength.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel cutting tools without appropriate adaptations. | Employ specialized carbide or diamond-tipped cutting tools, and utilize sufficient lubrication to prevent excessive heat buildup and tool wear. |
| Inadequate pre-cleaning before welding or joining. | Thoroughly degrease and clean the titanium surfaces using appropriate solvents to ensure a clean weld and prevent contamination, which can compromise mechanical properties. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Aerospace structural components, Medical implants and surgical instruments, Chemical processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||