This Titanium Grade 5 stock sheet offers exceptional strength-to-weight ratio and superior corrosion resistance. Precisely manufactured to exacting standards, it is the material of choice for critical applications demanding reliability and performance.
| Standard | ASTM A106 |
| Material | Titanium Grade 5 |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.737" |
| Length | 36" |
| Width | 43" |
Manufactured under strict quality controls, this Titanium Grade 5 (Ti-6Al-4V) alloy sheet measures 0.737 inches thick, 36 inches in length, and 43 inches in width. Exhibiting a yield strength typically exceeding 120 ksi and excellent biocompatibility, Grade 5 titanium is renowned for its high performance in aerospace structures, demanding marine environments, and implantable medical devices. Its excellent fatigue strength and resistance to oxidation make it suitable for high-temperature applications and corrosive media.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material dimensions and surface finish against project specifications. 2. Ensure proper cutting and machining techniques are employed, utilizing appropriate tooling and coolants to avoid material work hardening. 3. Follow established welding or joining procedures for Titanium Grade 5, if applicable, ensuring inert gas shielding.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools without proper coolant can lead to excessive heat and work hardening. | Utilize carbide or high-speed steel tooling with ample coolant and a controlled feed rate when machining Titanium Grade 5. |
| Improper surface preparation before welding can result in porosity and reduced weld strength. | Thoroughly clean the weld joint and surrounding area with a degreaser and wire brush, followed by immediate welding under an inert gas atmosphere. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Aerospace structural components, Medical implants and surgical instruments, High-performance automotive parts.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||