This Titanium Grade 5 stock sheet offers exceptional strength, low density, and excellent corrosion resistance. Precision-cut to specified dimensions, it's ready for critical manufacturing processes.
| Standard | DIN 933 |
| Material | Titanium Grade 5 |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.069" |
| Length | 29" |
| Width | 14" |
Built to exacting engineering tolerances, this Titanium Grade 5 stock sheet measures 0.069 inches in thickness, 29 inches in length, and 14 inches in width. Composed of approximately 90% titanium, 6% aluminum, and 4% vanadium (Ti-6Al-4V), this alloy exhibits a superior strength-to-weight ratio, high tensile strength, and excellent fatigue strength. It is biocompatible and resistant to a wide range of corrosive environments, making it suitable for demanding industrial, aerospace, and medical applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material dimensions and quality against purchase order. 2. Clean the sheet surface thoroughly to remove any contaminants. 3. Proceed with cutting, machining, or forming operations as per design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper handling leading to surface scratches or contamination. | Always wear clean gloves when handling and store sheets in protective packaging or on clean surfaces. |
| Using incorrect cutting or machining parameters, potentially damaging the material or tooling. | Consult Ti-6Al-4V machining guidelines and use appropriate speeds, feeds, and lubrication. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Aerospace structural components, Medical implants and surgical instruments, High-performance sporting goods, Chemical processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||