This Titanium Grade 5 stock sheet offers exceptional strength-to-weight ratio and superior corrosion resistance. Precisely manufactured for demanding industrial, aerospace, and medical applications.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.536" |
| Length | 34" |
| Width | 40" |
Precision-manufactured to tight tolerances, this Titanium Grade 5 (Ti-6Al-4V) stock sheet measures 0.536 inches thick, 34 inches in length, and 40 inches in width. It delivers a minimum tensile strength of 130 ksi and a yield strength of 120 ksi, conforming to ASTM B265 standards. The alloy's inherent biocompatibility and resistance to oxidation make it ideal for surgical implants, aerospace structural components, and high-performance marine equipment where reliability under extreme conditions is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material specifications and dimensions against project requirements. 2. Ensure proper cutting and machining equipment is calibrated for titanium alloys. 3. Implement appropriate safety protocols for handling and fabricating high-strength materials.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard tooling without adjustments for titanium's hardness and thermal conductivity. | Employ specialized tooling with appropriate coatings and speeds/feeds to prevent excessive heat buildup and tool wear. |
| Inadequate edge preparation before welding or joining, leading to potential defects. | Thoroughly clean and chamfer edges according to best practices for titanium welding to ensure a sound joint. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Aerospace structural components, Medical implants and instruments, High-performance marine hardware.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||