This Titanium Grade 5 stock sheet, measuring 0.184 inches thick, 33 inches long, and 39 inches wide, offers exceptional strength-to-weight ratio and superior corrosion resistance for demanding suspending and bracing solutions.
| Standard | ASTM A106 |
| Material | Titanium Grade 5 |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.184" |
| Length | 33" |
| Width | 39" |
Trusted by engineers across multiple sectors, this Titanium Grade 5 (Ti-6Al-4V) stock sheet delivers unparalleled performance in critical structural applications. With a precise thickness of 0.184 inches, a length of 33 inches, and a width of 39 inches, it provides ample material for custom fabrication. Grade 5 titanium exhibits a high tensile strength, excellent fatigue resistance, and superior biocompatibility, making it ideal for environments where corrosion, extreme temperatures, and high mechanical stress are prevalent. Its low density further enhances its utility in weight-sensitive designs.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material certification against project specifications. 2. Employ appropriate cutting methods for titanium alloys, such as waterjet or laser cutting, ensuring minimal heat-affected zones. 3. Utilize compatible fasteners and welding procedures (e.g., Gas Tungsten Arc Welding - GTAW) for secure and robust integration into the suspending or bracing system.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for titanium alloys, leading to rapid tool wear and compromised cut quality. | Utilize specialized cutting tools and techniques recommended for titanium, such as coolant-lubricated carbide or cobalt-based high-speed steel tooling, or non-contact methods like waterjet or laser cutting. |
| Inadequate surface preparation prior to welding, resulting in weld contamination and reduced joint strength. | Thoroughly clean the titanium surface with a degreaser and a stainless steel brush dedicated solely to titanium to remove any oils, grease, or oxides before welding. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Aerospace structural components, Medical implants and prosthetics, Marine engineering and offshore structures.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||