This premium Titanium Grade 5 stock sheet is engineered for extreme environments. Its exceptional strength-to-weight ratio and superior corrosion resistance make it ideal for advanced abrading and polishing applications where performance is critical.
| Standard | DIN 933 |
| Material | Titanium Grade 5 |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.260" |
| Length | 15" |
| Width | 28" |
Specified by design engineers worldwide, this Titanium Grade 5 stock sheet (Ti-6Al-4V alloy) offers a nominal thickness of 0.260 inches, with precise dimensions of 15 inches in length and 28 inches in width. This aerospace-grade material exhibits an excellent balance of high strength, low density, and outstanding corrosion resistance, particularly in saline and industrial atmospheres. Its biocompatibility also lends itself to specialized medical device fabrication. The material's inherent toughness and resistance to wear make it a superior choice for abrasive media handling and surface finishing processes.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the workpiece surface is clean and free of contaminants. 2. Securely mount the Titanium Grade 5 sheet to the abrading/polishing fixture using appropriate clamping mechanisms. 3. Verify alignment and ensure proper contact with the substrate for consistent material removal or surface refinement.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard abrasives not rated for titanium alloys. | Employ specialized abrasives designed for hard metals, such as diamond or silicon carbide grit, to prevent premature wear and ensure effective material processing. |
| Insufficient coolant or lubrication during high-speed operations. | Maintain a consistent flow of appropriate coolant or lubricant to dissipate heat, prevent workpiece distortion, and extend tool life. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Aerospace component finishing, High-wear industrial equipment surfacing, Medical implant fabrication and polishing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||