This Titanium Grade 5 stock sheet offers exceptional strength-to-weight ratio and superior corrosion resistance. Precisely manufactured to exacting dimensions, it is the optimal material for critical component fabrication.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.497" |
| Length | 31" |
| Width | 17" |
Manufactured under strict quality controls, this Titanium Grade 5 (Ti-6Al-4V) stock sheet boasts a thickness of 0.497 inches, a length of 31 inches, and a width of 17 inches. Exhibiting excellent tensile strength and fatigue resistance, this alloy is widely utilized in aerospace airframes, engine components, and medical implants due to its biocompatibility and inertness in corrosive environments. Its machinability is well-documented, allowing for precise fabrication of complex geometries.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure proper tooling and lubrication for sawing or cutting operations. 2. Secure the titanium sheet firmly to prevent movement during machining. 3. Perform cuts at appropriate speeds and feed rates to avoid material work hardening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for titanium alloys. | Employ specialized carbide or high-speed steel tooling with appropriate geometries and coatings for titanium machining. |
| Inadequate cooling during cutting, leading to excessive heat buildup. | Utilize copious amounts of coolant or a flood lubrication system to dissipate heat effectively and prevent tool damage or material degradation. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Aerospace structural components, Medical implants and surgical instruments, High-performance industrial equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||