This Titanium Grade 5 stock sheet offers exceptional strength-to-weight ratio and corrosion resistance, making it a premium choice for critical applications where performance is paramount.
| Standard | DIN 933 |
| Material | Titanium Grade 5 |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.285" |
| Length | 41" |
| Width | 34" |
Designed for demanding industrial environments, this Titanium Grade 5 (Ti-6Al-4V) stock sheet boasts a precise thickness of 0.285 inches, a length of 41 inches, and a width of 34 inches. This aerospace-grade alloy exhibits excellent tensile strength, fatigue resistance, and biocompatibility, ensuring superior performance in extreme conditions. Its passivation layer provides inherent resistance to a wide range of corrosive media, making it suitable for chemical processing, marine hardware, and high-performance automotive components.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure proper cutting tools are selected based on Titanium Grade 5's hardness and machinability characteristics. 2. Utilize coolant during sawing or cutting operations to prevent overheating and maintain tool integrity. 3. Deburr edges thoroughly after cutting to remove sharp fragments and ensure a safe finish.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for titanium alloys. | Employ specialized carbide or high-speed steel cutting tools with appropriate geometry and coatings for titanium. |
| Insufficient lubrication or coolant during machining. | Maintain a consistent flow of high-quality cutting fluid to dissipate heat, lubricate the cutting zone, and prolong tool life. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Aerospace structural components, Medical implants and prosthetics, Marine hardware and subsea equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||