This Titanium Grade 5 stock sheet is engineered for superior performance in critical fabrication projects. Its exceptional strength-to-weight ratio and robust corrosion resistance make it ideal for demanding applications.
| Standard | ASTM A106 |
| Material | Titanium Grade 5 |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.984" |
| Length | 31" |
| Width | 13" |
Precision-manufactured to tight tolerances, this Titanium Grade 5 (Ti-6Al-4V) alloy sheet measures 0.984 inches (25 mm) in thickness, 31 inches (787.4 mm) in length, and 13 inches (330.2 mm) in width. Exhibiting an ultimate tensile strength typically exceeding 130 ksi and a yield strength of 120 ksi, it offers excellent mechanical properties. Its passivation layer provides superior resistance to a wide range of corrosive environments, including saltwater and industrial chemicals. This makes it a preferred material for aerospace components, medical implants, marine hardware, and chemical processing equipment where reliability and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure all cutting and forming tools are specifically designed for titanium alloys to prevent material contamination and maintain edge integrity. 2. Following fabrication, implement appropriate post-processing treatments such as stress relieving or passivation if required by the application's environmental demands. 3. Verify dimensional accuracy and surface finish against design specifications before integration into the final assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel tooling for cutting or forming titanium. | Employ specialized carbide or diamond-coated tooling designed for titanium to prevent premature tool wear and achieve clean cuts/bends. |
| Neglecting proper cleaning procedures after fabrication. | Thoroughly degrease and clean the titanium surface post-fabrication to remove any lubricants or contaminants that could compromise corrosion resistance. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Aerospace structural components, Medical implants and surgical instruments, High-performance marine hardware, Chemical processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||