This Titanium Grade 5 stock sheet provides exceptional strength-to-weight ratio and corrosion resistance. Precisely manufactured to demanding specifications, it is ideal for critical safety components and high-performance environments.
| Standard | DIN 933 |
| Material | Titanium Grade 5 |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.951" |
| Length | 12" |
| Width | 16" |
Manufactured under strict quality controls, this Titanium Grade 5 (Ti-6Al-4V) stock sheet measures 0.951 inches thick, 12 inches wide, and 16 inches long. Exhibiting a minimum tensile strength of 130,000 psi and yield strength of 120,000 psi, it offers excellent fatigue strength and biocompatibility. Its high resistance to saltwater and various chemicals makes it suitable for aerospace, medical implants, and marine hardware where failure is not an option.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free from contaminants before fabrication. 2. Utilize appropriate cutting and forming techniques for Titanium Grade 5, considering its hardness and workability. 3. Follow all established welding procedures for Ti-6Al-4V if required, ensuring inert gas shielding.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not rated for titanium alloys. | Employ carbide-tipped or diamond-coated cutting tools specifically designed for high-strength alloys to prevent premature tool wear and ensure clean cuts. |
| Inadequate inert gas coverage during welding, leading to oxidation. | Utilize a high-purity Argon or Helium shielding gas at the correct flow rate to prevent atmospheric contamination and ensure strong, defect-free welds. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Aerospace structural components, Medical implant substrates, High-stress marine hardware.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||