Premium Titanium Grade 5 stock sheet engineered for demanding applications. This sheet offers exceptional strength-to-weight ratio, superior corrosion resistance, and biocompatibility for critical uses.
| Standard | ASTM A106 |
| Material | Titanium Grade 5 |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.933" |
| Length | 30" |
| Width | 17" |
Built to exacting engineering tolerances, this Titanium Grade 5 (Ti-6Al-4V) sheet measures 0.933 inches thick, 30 inches in length, and 17 inches in width. Possessing an ultimate tensile strength of approximately 130-150 ksi and a yield strength of 120 ksi, it exhibits excellent fatigue strength and fracture toughness. The material's low density (approx. 4.43 g/cm³) coupled with its inherent biocompatibility makes it a preferred choice for aerospace components, medical implants, and high-performance industrial equipment where reliability and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material meets all project specifications and quality certifications. 2. Ensure cutting, shaping, or welding processes are performed in accordance with Ti-6Al-4V best practices, often requiring inert gas shielding. 3. Thoroughly clean all surfaces to remove any contaminants before joining or further processing.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel welding procedures. | Employ specialized procedures for titanium alloys, typically involving inert gas shielding (e.g., Argon or Helium) to prevent contamination and embrittlement. |
| Insufficient material preparation before welding or forming. | Thoroughly degrease and clean the titanium surface to remove any oxides, oils, or other contaminants that could compromise weld integrity or material performance. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Aerospace structural components, Medical implants and surgical instruments, High-performance marine hardware.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||