This precisely manufactured Titanium Grade 5 stock sheet offers exceptional strength-to-weight ratio and corrosion resistance. Measuring 0.924" thick, 30" long, and 21" wide, it's engineered for critical applications demanding reliability and durability.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.924" |
| Length | 30" |
| Width | 21" |
Manufactured under strict quality controls, this Titanium Grade 5 stock sheet adheres to rigorous industry standards, ensuring consistent material properties. Its nominal dimensions are 0.924 inches (23.47 mm) in thickness, 30 inches (762 mm) in length, and 21 inches (533.4 mm) in width. Grade 5 (Ti-6Al-4V) exhibits a minimum tensile strength of 120 ksi (827 MPa) and yield strength of 110 ksi (758 MPa), with excellent biocompatibility and resistance to saltwater and industrial chemicals. Ideal for structural components, high-performance fixtures, and demanding environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material certifications and dimensions prior to fabrication. 2. Employ appropriate cutting and machining techniques for titanium alloys, utilizing specialized tooling and coolant. 3. Ensure proper surface preparation and cleaning before joining or assembly to maintain material integrity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for titanium alloys. | Utilize carbide or cobalt-based cutting tools with a slow feed rate and high-speed rotation, along with robust lubrication, to prevent tool wear and material overheating. |
| Inadequate post-machining cleaning leading to surface contamination. | Thoroughly clean all machined surfaces with isopropyl alcohol or an appropriate degreaser to remove any residual cutting fluids, chips, or contaminants that could affect performance or integrity. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Aerospace structural components, High-performance automotive parts, Medical implants and surgical instruments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||