This Titanium Grade 5 stock sheet offers exceptional strength-to-weight ratio and superior corrosion resistance, making it ideal for critical material handling components where performance and longevity are paramount.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.900" |
| Length | 30" |
| Width | 38" |
Manufactured under strict quality controls, this Titanium Grade 5 (Ti-6Al-4V) sheet measures 0.900 inches thick, 30 inches in length, and 38 inches in width. Exhibiting a minimum tensile strength of 130 ksi and yield strength of 120 ksi, it boasts excellent biocompatibility and resistance to saltwater and various industrial chemicals. Its high operating temperature range and fatigue strength ensure reliable performance in challenging environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is free from surface contaminants before fabrication. 2. Utilize appropriate cutting and forming tools designed for titanium alloys to maintain material integrity. 3. Implement proper welding procedures, including inert gas shielding, if welding is required.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel cutting tools without proper lubrication, leading to excessive heat and tool wear. | Employ specialized carbide or high-speed steel tooling with flood cooling and appropriate cutting speeds for titanium. |
| Inadequate surface preparation before welding, causing porosity and reduced weld strength. | Thoroughly clean the weld area with a degreaser and wire brush to remove any oxide layers or contaminants. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Custom material handling equipment frames, High-stress structural components, Corrosion-resistant bulk handling containers.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||