This robust Titanium Grade 5 stock sheet offers exceptional strength-to-weight ratio and superior corrosion resistance. Its advanced material properties make it indispensable for demanding industrial applications.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.888" |
| Length | 40" |
| Width | 34" |
Built to exacting engineering tolerances, this Titanium Grade 5 (Ti-6Al-4V) stock sheet measures 0.888 inches in thickness, 40 inches in length, and 34 inches in width. This aerospace-grade alloy exhibits a high tensile strength and excellent fatigue resistance, with a density approximately 60% that of steel. Its passivation layer provides outstanding resistance to most corrosive media, including saltwater and various chemicals. Ideal for fabrication in aerospace, marine, chemical processing, and medical implant industries where extreme performance is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Prepare the substrate surface, ensuring it is clean, dry, and free from contaminants. 2. Carefully position the Titanium Grade 5 sheet according to design specifications. 3. Utilize appropriate fastening methods, such as welding or mechanical fasteners, considering the material's properties and intended load.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Inadequate surface preparation leading to poor adhesion or weld integrity. | Thoroughly degrease and abrade the titanium surface prior to any joining operation. |
| Using incompatible welding consumables, resulting in compromised joint strength. | Always use filler metals specifically designed for Titanium Grade 5 welding, such as ERTi-5. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Aerospace structural components, Corrosion-resistant chemical processing equipment, High-performance marine hardware.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||