This Titanium Grade 5 stock sheet offers exceptional strength-to-weight ratio and superior corrosion resistance. Engineered to meet rigorous industrial demands, it is a premium choice for critical components.
| Standard | DIN 933 |
| Material | Titanium Grade 5 |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.876" |
| Length | 23" |
| Width | 14" |
Engineered for reliability and performance, this Titanium Grade 5 (Ti-6Al-4V) stock sheet measures 0.876 inches thick, 23 inches in length, and 14 inches in width. Grade 5 titanium, an alpha-beta alloy, exhibits excellent mechanical properties, including high tensile strength and fatigue resistance, while maintaining good ductility and weldability. Its passivation layer provides outstanding resistance to a wide range of corrosive environments, making it suitable for aerospace, medical implants, and high-performance chemical processing equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free from contaminants. 2. Utilize appropriate cutting and shaping tools designed for titanium. 3. Employ proper welding procedures if joining, following established Ti-6Al-4V guidelines.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel cutting tools without appropriate speed and feed adjustments. | Employ carbide or specialized titanium cutting tools with slower speeds and higher feed rates to prevent overheating and tool wear. |
| Inadequate surface preparation before welding, leading to porosity. | Thoroughly clean and degrease the weld joint area using appropriate solvents and remove any oxide layers formed on the surface. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Aerospace structural components, Medical implants and surgical instruments, High-performance marine hardware.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||