This Titanium Grade 5 stock sheet offers exceptional strength, corrosion resistance, and a superior strength-to-weight ratio. Precisely manufactured for demanding industrial, aerospace, and medical applications requiring high performance and reliability.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.868" |
| Length | 40" |
| Width | 46" |
Built to exacting engineering tolerances, this Titanium Grade 5 (Ti-6Al-4V) stock sheet measures 0.868 inches in thickness, 40 inches in length, and 46 inches in width. Conforming to ASTM B265 standards, it exhibits a minimum tensile strength of 130 ksi and a yield strength of 120 ksi. Its excellent biocompatibility and resistance to harsh environments make it ideal for critical components in aerospace airframes, surgical implants, and high-stress industrial machinery.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure cutting tools are properly calibrated and sharp for clean, precise cuts. 2. Utilize appropriate coolant and cutting speeds to prevent overheating and material deformation. 3. Inspect cut edges for burrs and perform deburring as necessary to meet application requirements.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using dull cutting tools, leading to ragged edges and increased rework. | Maintain sharp, high-quality cutting tools and replace them at recommended intervals. |
| Inadequate coolant application, causing localized heat buildup and potential material property degradation. | Apply a sufficient flow of appropriate coolant throughout the cutting process. |
A: This Titanium Grade 5 Stock Sheet is manufactured from Titanium Grade 5.
A: Aerospace Components, Medical Implants, High-Performance Sporting Goods.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||